Acquiring and Processing Meter Data
25 (46)
Adding Meters Manually
Fig. 15
Adding a meter
Meters that are connected but not found during a scan can be added manually by clicking on
the
Add
button in the
Meter
tab. The configuration of the meter must be known to be able to
add it manually.
The fields in the
Add meter
dialog correspond to the fields in the meter list. The following
parameters can be edited:
Serial
Serial number of the meter (must be 8 digits)
Link
Primary (link layer) address
Cycle (s)
Readout interval in seconds (0 = use general readout interval)
User label
User specific description of the meter
Modbus register
Modbus register address
Number of meters
If creating multiple meters with the same configuration
See also
Meter Tab, p. 11
.
Click
OK
to save the configuration. The new meter(s) will now appear in the list.
M-Bus to Modbus-TCP Gateway User Manual
SCM-1202-0096-EN 2.1
