Hirschmann PRS 40 EZ, Руководство оператора и по обслуживанию

Страница: 25 / 57

wind
© PRS 40 EZ REV A 03/16/06 190201_A
19
RADIO
In order to use the A2B, the A2B transmitter must first be set up to with the console.
Add the first A2B sensor to the console by pressing
SENSORS/A2B 1/ RADIO. The console will show "SEARCHING". Pull and release the cord
of the A2B switch. The switch is now setup.
Add the Second A2B sensor to the console by pressing
SENSORS/A2B 2/ RADIO. The console will show "SEARCHING". Pull and release the cord
of the A2B switch. The switch is now setup
7 WIND
7.1.1 Operation
The wind speed can be shown by itself on the screen or if in combination with other sensors, as an
additional screen.
The speed can be shown in miles per hour, or kilometers per hour.
When the wind speed is displayed by itself, the peak speed is also shown. The peak will be the
highest wind speed recorded since the system was started. When the system is turned off the peak
value will be reset. The peak value can also be reset by pressing the button.