Hirschmann PRS 40 EZ, Руководство оператора и по обслуживанию

Страница: 13 / 57

Angle
© PRS 40 EZ REV A 03/16/06 190201_A
7
5 ANGLE
5.1.1 Operation
When an angle sensor is installed either with radio or hardwired the function of the console is the
same. The angle is displayed in tenths of a degree
When other sensors are installed, they can be shown on other screens. These screens can be
accessed with the up/down arrows.
5.1.2 Limits
The limits are set by selecting
SETUP/ LIMITS/ ANGLE
There is then the choice to set the minimum angle limit or the maximum angle limit.
To set the limit:
•
Select the desired limit to set.
•
Move the boom to desired angle.
•
Press enter.
The angle limits can be cleared without moving the boom to the desired angle. To clear the angle limit
without booming to the angle:
SETUP/ LIMITS/ ANGLE/ MINIMUM
Press and hold the down arrow, . The limits will change to -5 degrees.
SETUP/ LIMITS/ ANGLE/ MAXIMUM
Press and hold the up arrow, . The limits will change to 90 degrees.