Hirschmann PRS 40 EZ, Руководство оператора и по обслуживанию

Страница: 42 / 57

Operator’s / Service Manual, PRS 40 EZ
© PRS 40 EZ REV A 03/16/06 190201_A
36
11 ADDING SENSORS
To add a new sensor,
Menu- SETUP/SENSORS/
This gives the sensor select/information screen. It shows the status of all hardware. Each sensor has
several options:
*NOT INSTALLED
HARDWIRED
RADIO
The status of the sensor is indicated with an "*". In the example, the sensor is "not installed".
The PRS40 EZ is a very powerful and flexible system. To allow for multiple types of sensors, a 4
position DIP switch is utilized. The DIP switch must be in the proper position for the attached sensor
to function properly. The DIP switch will be set into the proper position before shipped from the
factory.
If adding a hardwired sensor to the system, use the following for the diagrams.
DIP SWITCH SETTINGS
Current Linerider
- SETUP 1
Kruger Angle sensor - SETUP 3
Serial Angle sensor - NA
Hardwired Wind speed - SETUP 4
Hardwired A2B - SETUP 4
All Radio sensors - NA
WIRELESS SOCKET
POWER INDICATION
RUN INDICATION
DIP SWITCH