Hirschmann PRS 40 EZ, Руководство оператора и по обслуживанию

Страница: 44 / 57

Operator’s / Service Manual, PRS 40 EZ
© PRS 40 EZ REV A 03/16/06 190201_A
38
12.1 SCREENS
Communication error screen
When working from the normal operating screen and an error occurs, a communication error screen
will be displayed temporarily, which indicates loss of communication between a sensor and the
console.
This screen shows that there is an error in the communication between the A2B sensor and the
console. The sensor that is in error is indicated on the bottom line.
To return to this communication error screen, return to the SETUP screen and press .
At this point, you are enabled to scroll through all sensors which are experiencing a communication
error by pressing the UP and DOWN arrows.
12.1.1 To test the outputs:
The following outputs can be tested. Function lockout, Limit LED's, Buzzer.
SETUP >> OPTIONS
>>
TEST SEQUENCE.
Select this option and then press . Each of the outputs
will be cycled on individually, enabling the user to determine if each is functioning correctly.
12.1.2 To test the inputs:
The analog input screen may be used to assist with troubleshooting errors.
To access this select:
SETUP >> OPTIONS >> ANALOG INPUT
To change between milliamps and volts use the UP or DOWN arrows while viewing
the analog input.