Hioki ST5540 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 326

Hioki ST5540 Скачать руководство пользователя страница 11

5

2

Follow these precautions to ensure safe operation and to obtain the full benefits of the various functions.

Usage Notes

Avoid the following locations that could cause an accident or damage to the instru-

ment.

Exposed to direct sunlight
Exposed to high temperature

In the presence of corrosive or
explosive gases

Exposed to water, oil, other

chemicals, or solvents
Exposed to high humidity or
condensation

Exposed to strong electro-
magnetic fields
Near electromagnetic radia-
tors

Exposed to high levels of par-
ticulate dust

Near induction heating sys-
tems
(e.g., high-frequency induc-
tion heating systems and IH
cooking utensils)

Subject to vibration

Avoid obstructing the ventilation holes on the sides of the instrument, as it could
overheat and be damaged, or cause a fire.

If the instrument operates abnormally or displays an abnormal indication, turn off
the power switch immediately, and contact your dealer or Hioki representative.

Precautions before measurement

• Before turning on the instrument, confirm that the voltage of the power

source matches the voltage specification indicated on the instrument's
power connector ([AC IN]). (The voltage specification (100, 120, 220 or
240 V) ordered by the customer is marked with a black dot in the line
voltage column on the rear panel.)
Note that using the power supply with improper voltage may damage the
instrument and result in electrical hazards.

• To avoid electrical accidents and to maintain the safety specifications of

this instrument, connect the power cord provided only to a 3-contact
(two-con ground) outlet.

Do not use excessive force on the touch panel, and do not use sharp objects that
could damage the touch screen.

«
...
9
10
11
12
13
...
»

Содержание ST5540







































































































































































































































































































































Отзывы:

Нет отзывов