Hioki 9593-02, Руководство пользователя

Страница: 56 / 92

50
────────────────────────────────────────────────────
7.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:MEMory:SAVE
■ Saves in Setting memory.
:STARt
■ Starts a test.
:STATe?
■ Queries the state.
Syntax :MEMory:SAVE
_<data>
<data> Numerical data in NR1 format between 1 and 20
Function
Saves the current settings in Setting memory numbered <data>.
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Example
Transmission :MEMory:SAVE 10
The current settings are saved in Setting memory numbered 10.
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the READY state causes
an execution error.
Syntax :STARt
Function Starts a test in the READY state (except the optional function setting screen).
Note
The ":STARt" command works in a state in which the momentary OUT
settings are disabled even though the momentary OUT settings have been set.
Example
Transmission :STARt
Error
The execution of this command in a state other than the READY state causes
an execution error.
If the data parameters are set after this command, a command error occurs.
Syntax :STATe?
Function
Returns the state as data.
<data>
Screening results: PASS, UFAIL, LFAIL, ULFAIL, READY, TEST, OFF
(character data)
PASS: PASS state
UFAIL: FAIL state (UPPER FAIL)
LFAIL: FAIL state (LOWER FAIL)
ULFAIL: FAIL state (FAIL due to the protection function)
OFF: Hold state (in a state other than the PASS and FAIL states), save
screen, load screen, optional function setting screen
Example
Response
If headers are on :STATE PASS
If headers are off PASS
Error
If the response message is longer than 300 bytes, a query error is generated.