Hioki 9593-02, Руководство пользователя

Страница: 21 / 92

15
────────────────────────────────────────────────────
4.3 Connecting the Printer
────────────────────────────────────────────────────
WARNING
To prevent electrical shock, before adding or replacing the RS-232C
interface, check that the power for the unit is off and the power cord
and connectors are disconnected. [The fixing screws must be firmly
tightened or the input unit may not function up to specification, or may
even fail.]
To avoid the danger of electric shock, never operate the unit with an
RS-232C interface removed. If you should wish to use the unit after
removing an interface, fit a blank panel over the opening of the removed
unit.
4.3 Connecting the Printer
To connect the 9593-02 and printer, use the 9446 CONNECTING CABLE.
Use the 9443* AC ADAPTER and the 1196 RECORDING PAPER. (All are
options.)
*9443-01 (for Japan)
*9443-02 (for EU)
*9443-03 (for U.S.A.)
(1) Make the settings for both the 9442 PRINTER and the 9593-02.
(2) Power off both the 3157 and the 9442 PRINTER.
(3) Install the 9593-02 in the 3157.
(4) Use the 9446 CONNECTING CABLE to connect the 9593-02 and printer.