Hioki 9593-02, Руководство пользователя

Страница: 55 / 92

49
────────────────────────────────────────────────────
7.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:MEMory:FILE?
■ Queries the contents of Setting memory.
:MEMory:LOAD
■ Loads
Setting memory.
Syntax :MEMory:FILE?
_<data 1>
<data 1> Numerical data in NR1 format between 1 and 20
Function
Returns as data (<data2>) the contents of Setting memory numbered <data 1>
as <output current value>, <maximum test value>, <minimum test value>,
<test time> in order.
If the unit of the maximum and minimum test values is set to "OHM"
(resistance), the maximum and minimum test values are expressed as
resistance values.
If the unit of the maximum and minimum test values is set to "VOLT"
(voltage), the maximum and minimum test values are expressed as voltage
values.
<data 2>
Output current value: Numerical value in NR2 format
Maximum test value, minimum test value, test time: OFF, --- (character data),
or numerical value in NR2 format
When the minimum test value is not set, returns "---."
When the minimum test value is set and set to OFF, returns "OFF."
When the endless timer function is set, returns "---."
When the endless timer function is not set, and the test time is set to OFF,
returns "OFF."
Example
Transmission :MEMory:FILE? 1
Response
If headers are on
:MEMORY:FILE 25.0,0.100,0.000,60.0
If headers are off
25.0,0.100,0.000,60.0
Error
If the response message is longer than 300 bytes, a query error is generated.
The execution of this command in a state other than the READY state causes
an execution error.
Syntax :MEMory:LOAD
_<data>
<data>
Numerical data in NR1 format between 1 and 20
Function Loads Setting memory numbered <data>.
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Example
Transmission
:MEMory:LOAD 10
Setting memory numbered 10 is loaded.
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the READY state causes
an execution error.