Hioki 9593-02, Руководство пользователя

Страница: 61 / 92

55
────────────────────────────────────────────────────
7.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:SYSTem:OPTion:COUNt
■ Sets the test data count function.
:SYSTem:OPTion:COUNt?
■ Queries the test data count function.
Syntax :SYSTem:OPTion:COUNt
_<data>
<data> Numerical data in NR1 format between 0 and 1
Function
Sets the test data count function.
0: Not set
1: Set
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Note
When the test data count function is not set, the setting for the maximum
number of test data is not reflected in the test.
Example
Transmission
:SYSTem:OPTion:COUNt 1
The test data count function is set.
Error
If <data> is other than numerical value described above, an execution error
occurs.
The execution of this command in a state other than the following states
causes an execution error:
･ READY state
･ Optional function setting screen
Syntax :SYSTem:OPTion:COUNt?
Function
Returns the test data count function setting as a numerical value in NR1
format.
<data>
Numerical data in NR1 format between 0 and 1
Example
Response
If headers are on :SYSTEM:OPTION:COUNT 1
If headers are off 1
Error
If the response message is longer than 300 bytes, a query error is generated.