Hioki 9593-02, Руководство пользователя

Страница: 60 / 92

54
────────────────────────────────────────────────────
7.4 Commands Specific to the 3157
────────────────────────────────────────────────────
:SYSTem:OPTion:CDATa
■ Sets the maximum number of test data in the test data count function.
:SYSTem:OPTion:CDATa?
■ Queries the maximum number of test data in the test data count function.
Syntax :SYSTem:OPTion:CDATa
_<data>
<data> Numerical data in NR1 format between 1 and 99
Function
Sets the maximum number of test data in the test data count function.
The numerical value can be in NRf format, but any digits after the decimal
point will be rounded.
Note When the test data count function is not set, the setting for the maximum
number of test data is not reflected in the test.
Example
Transmission
:SYSTem:OPTion:CDATa 10
The maximum number of test data is set to 10.
Error
If <data> is other than numerical value described above, an execution error
occurs.
If a smaller value than that set for the number of test data is set, an
execution error occurs.
The execution of this command in a state other than the following states
causes an execution error:
･ READY state
･ Optional function setting screen
Syntax :SYSTem:OPTion:CDATa?
Function
Returns the setting for the maximum number of test data in the test data
count function as a numerical value in NR1 format.
<data>
Numerical data in NR1 format between 1 and 99
Example
Response
If headers are on :SYSTEM:OPTION:CDATA 10
If headers are off 10
Error
If the response message is longer than 300 bytes, a query error is generated.