Hioki 3532-50, Инструкция по эксплуатации

Страница: 165 / 198

151
_____________________________________________________________________________________________
6.1 Maintenance and Servicing
______________________________________________________________________________________________
1
2
3
4
5
6
7
8
9
10
11
12
13
14
A
NOTE
Chapter 6
Maintenance, Adjustment, and
Disposal
6.1 Maintenance and Servicing
In order to use the 3532-50 safely, the following maintenance and checking
procedures should be executed at the proper intervals.
Be sure to read assiduously the various items highlighted in this manual for
attention, in order to use the unit correctly.
If damage is suspected, check the "Troubleshooting" section before
contacting your dealer or Hioki representative.
Getting the 3532-50 unit wet or letting oil or dust enter inside its casing will
certainly damage it, and is quite likely to cause an electric shock accident or
a dangerous conflagration. If the unit has gotten seriously wet, oily, or
dusty, stop using it and send it for service at an approved
HIOKI service
facility.
Periodic calibration is necessary in order to maintain and authenticate the
accuracy of this testing device. When such calibration is necessary, you
should utilize the services of an approved
HIOKI
calibration facility.
A lithium battery is used in the 3532-50 for powering the backup memory.
When this battery becomes unfit for service, it is no longer possible to
preserve the testing conditions. Therefore, when it is not possible to
preserve the testing conditions, you should dispatch the unit to an approved
HIOKI
service facility for the lithium battery to be changed.
HIOKI intend to maintain the supply of spare parts for maintenance and
service of the 3532-50 unit for a minimum of seven years after the cessation
of production.