You can check Face Picture, Name, Employee ID and Temperature, to display the authentication
result.
Picture Uploading and Storage
Upload Captured Picture When Authenticating
Upload the pictures captured when authenticating to the platform automatically.
Save Captured Picture When Authenticating
If you enable this function, you can save the picture when authenticating to the device.
Save Registered Picture
The registered face picture will be saved to the system if you enable the function.
Upload Picture After Linked Capture
Upload the pictures captured by linked camera to the platform automatically.
Save Pictures After Linked Capture
If you enable this function, you can save the picture captured by linked camera to the device.
Upload Thermographic Picture
Upload thermographic picture captured to the platform automatically.
Save Thermographic Picture
If you enable this function, you can save the thermographic picture captured to the device.
Clear All Pictures in Device
Note
All pictures cannot be restored once they are deleted.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
Set Card Authentication Parameters
Set the card reading content when authenticate via card on the device.
Go to Configuration → Access Control → Card Authentication Settings .
Select a card authentication mode and click Save.
Full Card No.
All card No. will be read.
Wiegand 26 (3 bytes)
DS-K5604A-3XF Series Face Recognition Terminal User Manual
82
