8.5.15 Set Image Parameters
Set the video standard, WDR, brightness, contrast, saturation, and sharpness.
Steps
1. Click Configuration → Image Adjustment .
Figure 8-10 Image Settings Page
2. Configure the parameters to adjust the image.
Video Standard
Set the video frame rate when performing live view remotely. After changing the standard,
you should reboot the device to take effect.
PAL
25 frames per second. Suitable for mainland China, Hong Kong (China), the Middle East
countries, Europe countries, etc.
NTSC
30 frames per second. Suitable for the USA, Canada, Japan, Taiwan (China), Korea, the
Philippines, etc.
WDR
Enable or disable the WDR function.
When there are both very bright and very dark areas simultaneously in the view, WDR
balances the brightness level of the whole image and provide clear images with details.
Brightness/Contrast/Saturation/Sharpness
Drag the block or enter the value to adjust the live video's brightness, contrast, saturation,
and sharpness.
Start/end recording video.
DS-K5604A-3XF Series Face Recognition Terminal User Manual
70