Table 8-1 Temperature Measurement Parameters Descriptions
Parameter
Description
Temperature Measurement
Only
When enabling the function, the device will not authenticate
the permissions, but only take the temperature. When
disabling the function, the device will authenticate the
permissions and at the same time take the temperature.
Note
After enabling Temperature Measurement Only, you can
enable Capture White Light Picture. After enabling Capture
White Light Picture, the picture will be captured when
authenticating.
Unit
Select a temperature unit according to your preference.
Over-Temperature Threshold
(Max./Min.)
Edit the threshold according to actual situation. If the detected
temperature is higher or lower than the configured
parameters, an alarm will be triggered. By default, the value is
37.3°.
Temperature Compensation
If the measured temperature is higher/lower than the actual
object's temperature, you can set the compensation
temperature here. Available range: -99 °C to 99 °C
Door Not Open When
Temperature is Abnormal
When enabling the function, the door will not open when the
detected temperature is higher or lower than the configured
temperature threshold. By default, the function is enabled.
4. Click Save.
Black Body Settings
The black body can correct the measuring temperature. You should set the black body parameters
if the black body temperature measurement scene is required. If no black body is required, do not
set the black body parameters, or the temperature may not correct.
Steps
1. Click Configuration → Temperature → Black Body Settings .
DS-K5604A-3XF Series Face Recognition Terminal User Manual
87
