Input
The device can connect a Wiegand card reader.
Output
The can connect an external access controller. And the two devices will transmit the card No.
via Wiegand 26 or 34.
4. Click Save to save the settings.
Note
If you change the peripheral, and after you save the device parameters, the device will reboot
automatically.
Set Face Recognition Parameters
You can set face recognition parameters for accessing.
Click Configuration → Access Control → Face Recognition Parameters .
You can set Working Mode as Access Control Mode. The access control mode is the device normal
mode. You should authenticate your credential for accessing.
Set Privacy Parameters
Set the event storage type, picture upload and storage parameters, and the picture clearing
parameters.
Go to Configuration → Access Control → Privacy
Event Storage Settings
Select a method to delete the event. You can select from Delete Old Events Periodically, Delete
Old Events by Specified Time, or Overwriting.
Delete Old Events Periodically
Drag the block or enter number to set the period for event deleting. All events will be deleted
according to the configured time duration.
Delete Old Events by Specified Time
Set a time and all events will be deleted on the configured time.
Overwriting
The earliest 5% events will be deleted when the system detects the stored events has been over
95% of the full space.
Authentication Settings
Display Authentication Result
DS-K5604A-3XF Series Face Recognition Terminal User Manual
81
