HermanMiller Embody 100210688 Скачать руководство пользователя страница 85

Страница: 85 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHT REV A

Remove two lower front link shoulder bolts
and bushings using t-40 torx wrench

Bolt

Remove seat

Pull lower cover forward

Lift up front of seat assembly

Slide flat blade screwdriver along side of rear
tilt cover and pry off.

Rotate back of rear tilt cover up and pull off.

NOTE:

Front Tilt Cover does not need to be

removed. Cover not shown for clarity.

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды