HermanMiller Embody 100210688 Скачать руководство пользователя страница 119

Страница: 119 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B7061 REV A

Put the back edge of the seat assembly out-
side of the rack and rotate front of the seat
down.

Rotate front link cover down until holes are
aligned

Install bushings and shoulders bolts using
t-40 torx wrench. (250 In/lbs)

Install single lower bolts into each arm hous-
ing using t-27 torx wrench (repeat for oppo-
site side) (75 in/lbs)

Bolt

Return both arms or plugs using t-30 torx
wrench (repeat for opposite side) (75 in/lbs)

Check to make sure the seat fabric flaps are
secure over the seat clips and do not visibly pro-
trude where the spine engages the seat.
Note. If Clips popped off during disassembly
replace them as shown in Step # 42.

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды