manualshive.com logo in svg

HermanMiller Embody 100210688, Руководство пользователя

Поделиться
Скачать
HermanMiller Embody 100210688 Скачать руководство пользователя страница 79

©

2008 Herman Miller, Inc., Zeeland, Michigan  Printed in U.S.A.

™

L

, 

Z

, 

Y

, Embody, are trademarks of Herman Miller, Inc.

 

 Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make  

         changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHW REV C

Replace both arms or plugs using t-30 torx 
wrench (repeat for opposite side) (75 in/lbs)

25

Check to make sure the seat fabric flaps are 
secure over the seat clips and do not visibly 
protrude where the spine engages the seat.
Note. If Clips popped off during disassembly 
replace them as shown in Step # 26.

26

Post

Tilt

Clip

Clip

Clip

Align the spine to the tilt, and seat loca-
tor post and clips to the back attach-
ment points as shown in the 
figure on the right. Replace the Seat 
Clips as shown in the figure below if 
they popped off during step 4.

The Seat back posts should engage 
into the Seat Clips as illustrated in the 
figures below.

27

Содержание Embody 100210688

































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды