HermanMiller Embody 100210688 Скачать руководство пользователя страница 56

Страница: 56 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHZ REV A

Assemble Upper Link Bushings to replace-
ment Front Seat Link.

Insert one side of Front Seat Link into seat
frame. Rotate other side up until it snaps into

Put the back edge of the seat assembly out-
side of the rack and rotate front of the seat
down.

Rotate front link cover down until holes are
aligned

Install bushings and shoulders bolts using
t-40 torx wrench. (250 In/lbs)

Install single lower bolts into each arm hous-
ing using t-27 torx wrench (repeat for oppo-
site side) (75 in/lbs)

Bolt

Upper Link
Bushing

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды