HermanMiller Embody 100210688 Скачать руководство пользователя страница 103

Страница: 103 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YHR REV C

Tilt Lock Lever

Clip

Remove back assembly by sliding fingers
between the seat and back and pull the back
corners away from the seat until free

Note. If Clips pop off please discard.

2. Remove both bolts using t-30 torx bit

3. Remove arm and or plug
4. Repeat for other Arm or Plug.

Remove both Arms or Plugs
1. Raise tilt lock lever to lock position (up)

Remove single lower bolt from each arm
housing using t-27 torx wrench

Bolt

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды