HermanMiller Embody 100210688 Скачать руководство пользователя страница 5

Страница: 5 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YJD REV A

Slide your finger between the antler and the
fabric cover and pull up to release the Dome
trees from the antler.

Remove back assembly by sliding fingers
between the seat and back and pull the back
corners away from the seat until free.

Insert needlenose pliars between fabric and
wiffle material. Twist pliars until attachment
pegs pop loose. Repeat for all pegs.

Lay back onto replacement Fabric. Insert 4
replacement Christmas Tree Clips into
replacement Dome. Position Dome onto Fab-
ric.

Christmas Tree

Dome

Clip

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды