HermanMiller Embody 100210688 Скачать руководство пользователя страница 6

Страница: 6 / 128

2008 Herman Miller, Inc., Zeeland, Michigan Printed in U.S.A.

™

, Embody, are trademarks of Herman Miller, Inc.

Illustrations and specifications are based on the latest product information available at the time of publication. The right is reserved to make

changes in design and specifications at any time, without notice, and also to discontinue products.

1B4YJD REV A

Make sure the Dome tabs are placed over the
back collar as shown when assembling.

Pull Fabric over Christmas Tree Clips.

Starting at top of back on one side and
working down, insert posts into Back
Assembly.

Push in until posts fully engage with a
“snap”. Repeat process for other side.

Fold Dome over antler.

Firmly press down making sure christmas tree
clips fully engage into antler.

Содержание Embody 100210688

































































































































Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды

HermanMiller Embody 100210688, Руководство пользователя

Результаты поиска

Содержание Embody 100210688

Отзывы:

Бренды по названию

Популярные бренды