Henny Penny Evolution Elite EEE-153 Скачать руководство пользователя страница 72

Страница: 72 / 80

6-2. DO NOT DISTURB

Skip ‘SKIM’ Prompt (SP-30)

Press button and “SP-30 SKIP ‘SKIM’ PROMPT?”

flashes in the left display. Press the or buttons to

choose YES or NO.

2-Stage Wash Enabled (SP-31)

Press

button; “SP-31 2-STAGE WASH ENABLED?”

flashes in the left display. Press the or buttons to

choose YES or NO.

Time periods of peak operations during which the “FILTER

NOW?” message will not appear, may be programmed into the

fryer. There are three groupings of days - Monday thru Friday

(M-F), Saturday (SAT), and Sunday (SUN). Within each day

grouping, up to 4 time periods (M-F 1 thru M-F 4, SAT 1 thru

SAT 4, and SUN 1 thru SUN 4) may be programmed. A time

period may be anywhere from 1 to 180 minutes in length.

1. Press and hold the button for 5 seconds until “LEVEL

2”, followed by, “SP PROG” and “ENTER CODE” show in

the display.

2. Press button once more and “DO NOT DISTURB”

and “ENTER CODE” flash in the left display.

3. Enter code 1, 2, 3 (first 3 product buttons).

4. “DO NOT DISTURB ENABLED?” flashes in the left

display and YES or NO appears in the right display. Press

the or buttons to choose YES or NO.

5. Press button and “M-F 1” shows in the left display

and the time flashes in the right display. Press the

or , or use product buttons, to change the time.

6. Press button and “M-F 1” shows in the left display

and “A” or “P” flashes in the right display. Use the

or buttons to choose AM or PM.

7. Press button and “M-F 1” shows in left display and far

right character display flashes. Press product buttons to

enter amount of time (up to 180 minutes) during which

filtering will be inhibited, after time entered in step 5.

8. Press button to move to the next timer period, M-F 2.

9. Repeat steps 5, 6, 7, and 8 for other desired time periods.

6-1. SPECIAL PROGRAM

MODE (Continued)

Aug. 2011

Содержание Evolution Elite EEE-153

















































































Результаты поиска

Содержание Evolution Elite EEE-153

Отзывы:

Henny Penny Evolution Elite EEE-153, Руководство оператора, Страница: 72 / 80

Результаты поиска

Содержание Evolution Elite EEE-153

Отзывы: