manualshive.com logo in svg

Henny Penny Evolution Elite EEE-153, Руководство оператора

Поделиться
Скачать
Henny Penny Evolution Elite EEE-153 Скачать руководство пользователя страница 43

39

3-17.

 

A   CLEAN-OUT MODE  -

MANUAL 

(Continued)

Display shows “IS DISPOSAL UNIT IN PLACE”  “YES  NO”.  If 

“NO” is selected, display shows “INSERT DIS 

POSAL UNIT”.  

Once disposal unit is in place, press √ 

 button for YES; display shows 

“OPEN DRAIN”.  Open  drain, display shows “DRAINING” and oil 

drains from vat. 

Display shows “VAT EMTY” “YES NO”.  Press √ 

button

 when ready; display shows “CLOSE DRAIN”; close drain.  

Bulk Oil Systems Only! Display shows “CHK PAN” if the 

filter drain 

pan is missing. Once pan is in place, display 

 shows “OPEN DRAIN”.  

Pull-out drain knob and display  shows “DRAINING” and oil drains 

from vat.  Display then 

shows “√=PUMP” “X=DONE.  Press √ 

button, display 

 shows “DISPOSING” and oil is pumped from drain 

pan.   Once pan is empty, press X button twice and close drain.

6.

Display shows “SOLUTION ADDED?” “YES NO”.  Fill vat with hot

water to 1 in. (25 mm) above the top fill line, add 4 ozs. (0.12 liters)

 

of

open fryer cleaner, and mix thoroughly.  Press √ button and display

shows “START CLEAN” “YES NO”.

7.

Press √ button, display shows “CLEANING” and a count-down timer.

Heat regulates to 195°F (91°C) for this step for one hour.

Add water as needed during cleaning process to keep solution 1 in.

(25 mm) above the top fill line.

To stop cleaning cycle early, press X button; display shows “QUIT

CLEANING”  “YES NO”. Press √ button to cancel the rest of

countdown time and proceed to the rinse steps.

8.

Using the open fryer brush (never use steel wool), scrub the

inside of the vat.  At the end of the one hour, display shows “CLN

DONE” and beeps.  Press √ button and display shows “REMOVE SO

-

LUTION FROM VAT”.

9.

Empty filter drain pan of internal filtering components and move com

-

ponents to a sink to be cleaned.  Return empty filter drain pan and

 

cover

to fryer, making sure it is pushed securely into place and the latch

 

fully

engaged.

10.

Pull-out drain knob and drain half the vat contents into filter drain pan.

Remove drain pan from unit and dispose of cleaning solution.

To avoid burns when pouring hot solution, wear gloves and protective 

gear and take care to avoid splashing.

Oct.

 201

8

FIRE RISK

Do not exert pressure on the heating elements or fire may occur, 

resulting in personal injury and/or property damage.

Содержание Evolution Elite EEE-153

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды