manualshive.com logo in svg

Henny Penny Evolution Elite EEE-153, Руководство оператора

Поделиться
Скачать
Henny Penny Evolution Elite EEE-153 Скачать руководство пользователя страница 46

42

3-17.

 

B  CLEAN-OUT MODE  -

SMART TOUCH 

(Continued)

Display shows “VAT EMTY” “YES NO”.  Press √ button when ready.

 

Bulk Oil Systems Only! Display shows “CHK PAN” if the filter drain 

pan is missing. Once pan is in place, the drain will open automatically 

and display will show “DRAINING” and oil drains from vat.  Display 

then shows “√=PUMP” “X=DONE.  Press √ button, display shows “DIS

-

POSING” and oil is pumped from drain pan.  Once pan is empty, press X 

button twice and close drain.

6.

Display shows “SOLUTION ADDED?” “YES NO”.  Fill vat with hot

water to 1 in. (25 mm) above the top fill line, add 4 ozs. (0.12 liters) of

open fryer cleaner, and mix thoroughly.  Press √ button and display shows

“START CLEAN” “YES NO”.

7.

Remove the disposal shuttle and empty filter drain pan of internal filter

-

ing components and move components to a sink to be cleaned.  Return

empty filter drain pan and cover to fryer, making sure it is pushed secure

-

ly into place and the latch fully engaged.

8.

Press √ button, display shows “CLEANING” and a count-down timer.

Heat regulates to 195°F (91°C) for this step for one hour.
Add water as needed during cleaning process to keep solution 1 in. (25

mm)

above the top fill line.

To stop cleaning cycle early, press X button; display shows “QUIT  

CLEANING”  “YES NO”. Press √ button to cancel the rest of countdown 

time and proceed to the rinse steps.  

9.

Using a 1/2 gal. (2 liter) stainless steel pitcher, remove the solution from

the vat, pouring it into a heat-resistant pail for disposal. Any remaining

solution can be drained into the drain pan for disposal

10.

Using the open fryer brush (never use steel wool), scrub the inside of the

vat.  At the end of the one hour, display shows “CLN DONE”

 

and beeps.

Press √ button and display shows “REMOVE SOLUTION

 

FROM VAT”.

To avoid burns when pouring hot solution, wear gloves and protective 

gear and take care to avoid splashing.

11.

Return empty filter drain pan to fryer and press √ button. Display then

shows “VAT EMTY” “YES NO”.

Oct. 

201

8

FIRE RISK

Do not exert pressure on the heating elements or fire may occur, 

resulting in personal injury and/or property damage.

Содержание Evolution Elite EEE-153

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды