Henny Penny Evolution Elite EEE-153 Скачать руководство пользователя страница 53

Страница: 53 / 80

SECTION 4. INFORMATION MODE

This historic information can be recorded and used for opera-

tional and technical help and allows you to view the following:

• 1. E-LOG

• 2. LAST LOAD

• 3. DAILY STATS

• 4. OIL STATS

• 5. REVIEW USAGE

• 6. INPUTS

• 7. OUTPUTS

• 8. OIL TEMP

Not all Information Mode functions are discussed in this

section. To ensure proper operation of fryer, please

consult Henny Penny Corp. before changing any of these

settings. For more information on these functions, contact

Technical Support at 1-800-417- 8405, or 1-937-456-8405.

1. E-LOG

(error code log)

Press and buttons at the same time and “*INFO

MODE*” shows in the display, followed by “1. E-LOG”.

Press and to exit Information Mode at any

time.

Press and “A. (date & time) *NOW* show in displays.

This is the present date and time.

Press and if an error was recorded, “B. (date, time, and

error code information)” shows in display. This is the latest

error code that the controls recorded.

Press and the next latest error code information can be

seen.

Up to 10 error codes (B to K) can be stored in the E-LOG

section.

4-1. INFORMATION MODE

DETAILS

• 9. CPU TEMP

• 10. COMMUNICATION INFO

• 11. ANALOG INFO

• 12. ACTIVITY LOG

• 13. OIL LEVELS

• 14. PUMP VALVE INFO

• 15. AIF INFO

• 16. USB SUPPORT

April 2015

Содержание Evolution Elite EEE-153

















































































Результаты поиска

Содержание Evolution Elite EEE-153

Отзывы:

Бренды по названию

Популярные бренды

Henny Penny Evolution Elite EEE-153, Руководство оператора

Результаты поиска

Содержание Evolution Elite EEE-153

Отзывы:

Бренды по названию

Популярные бренды