HB-100/140/160Z1
Temperature Control Unit
Transport, packing and storage
34
O8285-EN 2017-12
5 Transport, packing and storage
5.1 Safety notes for transport
Improper transport
ATTENTION!
Damage due to improper transport!
Improper transport can result in considerable
material damage.
Therefore:
– Unit must be completely emptied (cooling and
system circuit)
– Only use original or equivalent packaging.
– On delivery as well as during internal transport,
proceed carefully when unloading the packages
and observe the notices on the packaging.
– Only use the designated suspension points.
– Only remove the packaging shortly before
assembly.
5.2 Transport
Transport by forklift truck
Fig. 5: Attachment points Palette
Packing units mounted on pallets can be transported by forklift
truckunder the following condition:
The forklift truck must be designed for the weight of the unit.
The driver must be authorised to drive the forklift truck.
Attachment:
1.
Insert the forks of the forklift truck between or under the pallet
stringers.
2.
Insert the forks deep enough so they protrude on the other
side of the pallet.
3.
Make sure that the pallet cannot tip over, if the centre of
gravity is offset.
4.
Raise the packing unit and begin with the transport.