HB-THERM THERMO-5 HB-100Z1 Скачать руководство пользователя

Страница: 21 / 134

HB-100/140/160Z1

Temperature Control Unit

Safety

O8285-EN 2017-12

2.7 Stickers and decals

The following symbols and information decals can be found in the
danger zone. They refer to the immediate vicinity around their
location.

WARNING!
Danger of injury because of illegible symbols!

Over the course of time stickers and decals may
become dirty or illegible for any other reason.

Therefore:
– Keep any safety, warning and operation related

decals in legible condition at all times.

– Replace damaged decals or stickers

immediately.

Hot surfaces

Hot surfaces, like hot machine parts, tanks or materials, but also
hot fluids, are not always detectable. Do not touch without
protective gloves.

Содержание THERMO-5 HB-100Z1







































































































































Результаты поиска

Содержание THERMO-5 HB-100Z1

Отзывы:

Похожие инструкции для THERMO-5 HB-100Z1

Бренды по названию

Популярные бренды

HB-THERM THERMO-5 HB-100Z1, Инструкция по эксплуатации

Результаты поиска

Содержание THERMO-5 HB-100Z1

Отзывы:

Похожие инструкции для THERMO-5 HB-100Z1

Бренды по названию

Популярные бренды