HB-100/140/160Z1
Temperature Control Unit
Operation
66
O8285-EN 2017-12
8.4 Operate singular unit as modular unit
An singual unit can be operated as a modular unit. The operation
takes place through the higher-level command Thermo-5 or
Panel-5.
Requirement
Additional equipment ZC
only one module logged on.
Software version newer then SW51-2_1413
NOTICE!
The numer of modules currently logged on is
displayed under
Display / Module
Operate unit as module
To operate an singular unit as module, proceed as follows:
1.
Switch the unit off with the
key.
2.
Display the menu page
Setting \ Remote operation
.
3.
Set parameter
Operate unit as module
to „ON“.
NOTICE!
If the parameter
Operate unit as module
is not
available, check the requirements.
The unit starts up again after confirmation of the warning with
the
key.
The unit logs on to the higher-level unit Thermo-5 or Panel-5
(
page 64).
Operate unit as module
To operate the unit again as singular unit, proceed as follows:
1.
Switch of the unit through the higher-level command Thermo-
5 or Panel-5.
2.
Select
Main menu
at the modular unit with the
key.
3.
Set parameter
Operate unit as module
to „OFF“.
The unit starts up again after confirmation of the warning with
the
key.
The unit can be operated again as an singular unit.
