HB-100/140/160Z1
Temperature Control Unit
Operation
64
O8285-EN 2017-12
8.2 Registering new modular units
Initialisation window
Fig. 25: Initialisation
If a new modular unit is detected, the initialisation window appears
at the operating module or individual unit.
Pos. No. Display
1
GIF-ID
2
Status of modular unit
3
Address of modular unit
Setting the address
Fig. 26: Setting the address
NOTE!
The modular unit is automatically assigned a free
address.
Proceed as follows in order to change the address:
1.
Select the modular unit and set the desired
Address
.
NOTE!
A set address may only exist once in a network.
The menu page can not be exited as long as the
address is repeatedly assigned.
Change address
Fig. 27: Display \ Actual value
Proceed as follows in order to subsequently change the address:
1.
Display the menu page
Display \ Module
.
2.
Select the modular unit and set the desired
Address
.
NOTE!
The status indicator for the selected modular unit
flashes green (fast).