Hawking HW9ACM, Руководство пользователя

Страница: 66 / 179

59
characters. PLEASE NOTE THAT ESSID IS CASE
SENSITIVE. Note that all other devices in the WDS mode
should use the same SSID.
Channel Number (4): Please select a channel number you wish to use. Please note
that this should be the same channel as the other bridge you
wish to connect to.
Device Mac Address (5): This is the Mac Address of the current HW9ACM. Use this for
reference when you set up the other point to point devices.
Mac Address Field (6): Input the other Mac Addresses for point to point. Note that
wds mode only works with up to 4 other HW9ACMs.
Adv. IP Address (7) This section allows you to set an IP Address and subnet mask to
fit your network if needed. Uncheck the box to input.
Otherwise, the default IP Address is 192.168.1.230
When you finish with all settings, please click ‘Next’ (8);
You can also click on “Set Security” to set up wireless security if you wish. A pop up
window with security settings will come up.
Note that each HW9ACM setup in wds mode must have the same type of security.
Click Apply and wait for the unit to reboot. Congratulations, you have set up the
HW9ACM in WDS Mode!