Hawk Senator S24S, Руководство пользователя

Страница: 95 / 176

OPERATION
6
95
Senator S24S
01/2019 - Senator S24S Radar Manual v1.00 en
C7.2.3 Reset
Passwords
This is a special password that makes your
passwords for the "operator" and "expert"
access levels go back to the default
passwords. This password is supplied on
request by the after-sales service
department.
— —
C7.2.4 Unlock
Extended
Range
This menu item can only be unlocked at the
factory.
— —
C7.2.5 Unlock SIL This menu item can only be unlocked at the
factory.
— —
C7.3 Errors C7.3 Errors C7.3 Errors C7.3 Errors
C7.3.1 Message View A log of device errors. Scroll down the list
and push [> >>>] to show the error details. The
error will have a letter code ("F", "S", "M",
"C" and "I") that agrees with NAMUR
NE 107 Guidelines.
Read only
—
C7.3.2 Error-Mapping
C7.3.2.1 Sensor:
Information
This permits you to change the error code
that is given to an incident.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting:
setting: setting:
setting: User
None, Information (I),
Maintenance Request
(M), Out of Specification
(S), Function Check (C),
Failure (F)
Information
C7.5 Units
C7.5.1 Length The length unit shown in Normal mode. If
you set this menu item to "Cst." (custom
length unit), enter values in menu items
C7.5.2.1 thru C7.5.2.3.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting:
setting: setting:
setting: User
m, cm, mm, ft, in, Cst. m
C7.5.2 Cst. Length
C7.5.2.1 Text Enter a text (8 characters maximum) for
the custom length unit.
—
Cst.
C7.5.2.2 Offset Enter an offset value.
—
0.0 m
C7.5.2.3 Factor Enter a factor. Multiply the measured value
by this factor to change m (metres) to the
custom length unit.
—
1.0
C7.5.3 Volume The volume unit shown in Normal mode if
you made a volume table in the C3
Conversion menu. If you set this menu item
to "Cst. Volume" (custom volume unit),
enter values in menu items C7.5.4.1 thru
C7.5.4.3.
Minimum access level to change the Minimum access level to change the Minimum access level to change the Minimum access level to change the
setting: setting: setting: setting: User
m
³
, L, hL, in
³
, ft
³
, gal,
ImpGal, yd
³
, bbl, bbl
(beer, US), Cst. Volume
m
³
C7.5.4 Cst. Volume
C7.5.4.1 Text Enter a text (8 characters maximum) for
the custom volume unit.
—
Cst.
C7.5.4.2 Offset Enter an offset value.
—
0.0 m
³
C7.5.4.3 Factor Enter a factor. Multiply the measured value
by this factor to change m
³
(cubic metres)
to the custom volume unit.
—
1.0
Menu No. Function Function description Selection list Default
www.hawkmeasurement.com