Harris CZ1000F, Руководство по вводу в эксплуатацию

Страница: 106 / 162

4-16 888-2685-001 12/24/07
WARNING: Disconnect primary power prior to servicing.
Ranger Commissioning Manual
Section 4 RF Testing
NOTE:
The operating frequency of 719 MHz is for U.S. operation. Qualcomm may
define other UHF frequencies for international operation.
4.2.13.5 Out of Band Emissions Test Results
The following plots show the typical results:
5 Change the following spectrum
analyzer settings:
RBW = 30 Khz
Start Frequency = 722 MHz
Stop Frequency = 722.1 MHz.
Then measure 722 – 722.1 MHz
with Exciter A on air. Less than -38 dBm/30 kHz
6 Attach a notch filter between the
spectrum analyzer and the output of
the bandpass filter.
Change the following spectrum
analyzer settings:
RBW = 100 kHz
Start Frequency = 698 MHz
Stop Frequency = 746 MHz.
Then measure 698-746 MHz Less than -38 dBm/100 kHz
7 Repeat steps 2-6 with Exciter B on
air. Results should be consistent
with those from steps 2--6.
Expected results Result (circle)
Out of band emissions with exciter A PASS FAIL
Out of band emissions with exciter B PASS FAIL
Step Procedure Description Expected Observation