Verifying connectivity on a MediaPort 7000
2. Press the panel again to display the Color Bar Output panel, as shown in the following figure.
To navigate within the Color Bar Output panel, press the left, right, top, or bottom sections of
the display. A carat symbol (>) at the beginning of a setting indicates that setting is selected for
configuration. If you do not touch the Color Bar Output panel for thirty seconds, the LCD panel will
return to the default status screen.
3. Configure the following settings as necessary:
•
Slot
: Press the left or right areas of the display to choose a module in one or both slots of the
chassis. Only slots with modules installed can be selected.
•
Channel
: Press the left or right areas of the display to choose Channel A, Channel B, or both
Channel A and Channel B.
•
PriMode
: Press the left or right areas of the display to choose the primary output format for the
module you have selected in the Slot option.
•
SecMode
: Press the left or right areas of the display to choose the secondary output format for the
module you have selected in the Slot option.
•
Activate
: Press the left or right areas of the display to activate changes made to the Color Bar
Output settings.
•
Exit
: Press the right area of the display to exit the Color Bar Output panel. Any changes you made
to the settings will be saved and will remain in effect until you restart the MediaPort or start a
player on the video server.
83
Spectrum System 8.4 Installation Guide
