Interruption of operation and solutions
The cPH1 executes internal testing routines to guarantee proper and safe operation. In
order to restore the previous operation state, first, it is essential that you determine the
type of malfunction undoubtedly.
DANGER!
Inside the charging station life threatening voltages occur!
Opening the charging station and following works on the charging
station must be carried out solely by qualified staff.
The following malfunctions can occur:
Malfunction
Possible cause
Proposal for solution
The LED lights
are not
working.
The cPH1 is not
provided with any
voltage.
The external power supply of the cPH1 is
interrupted: Please check the fuses and
protective switches of the pre-installation,
located in the lead.
An internal RCCB of the cPH1 is triggered:
Please check the status of the RCCB and plug
it back in by the rocker arm.
The LEDs of the
display are damaged.
If the LEDs are defect, please contact your local
distributor or previously employed electricians
so they can be exchanged.
The electric
vehicle is not
recognized.
The charging cable is
not plugged in correctly.
Remove the charging plug from the vehicle and
plug it in once again. Make sure that the cable
is set correctly in the socket of the vehicle
and/or the charging station.
The vehicle is
configured faultily.
Check the settings of your vehicle and restore
them to pre-setting if required.
The LEDs
display an
error sequence
The cPH1 recognizes a
malfunction.
All malfunctions displayed on the RFID
module relate to the RFID-registration. If the
error still persists, please register the RFID-
cards again or contact your local distributor.
Instruction Manual
cPH1
charging station
Version: 1.2.4
26
