Operation status
The cPH1 charging station is also designed for maximum security and reliable charging.
Through internal testing routines malfunctions are identified and immediate switch off is
issued. Should there be any malfunctions during the charging process, the LED-Display
and the LED lights of the RFID module will immediately indicate them. This chapter
describes how to recognize the error states and operating states and which measurements
are to take in order to repair the glitch.
LED-Display
The LED-Display on the front cover shows the current operation condition. For
visualization the LED lights can(
•
...glow (they are permanently turned on)
•
...not glow (they are permanently turned off)
When in normal operation mode the following colors and states are displayed as follows:
Colour code
Description
Green
The charging station/charging socket is ready. You can connect the
vehicle to charge at any time.
Blue
The electric vehicle is currently charging.
Red
An error occurred while charging. (Please contact a technician)
Green/Yellow
flashing
A RCM error occurred. (Please contact a technician)
Off
There is no power supply. (Please check the external fuses) /
There is an error at the charging point. (Please contact a technician)
Instruction Manual
cPH1
charging station
Version: 1.2.4
24
