Product description
Your cPH1 charging station permits safe and comfortable charging of electric
vehicles according to Norm IEC 61851-1, Mode 3.
Depending on the respective variant your cPH1 is laid out for charging as fast as
possible due to its circuit design and its diameter of cables and pins.
The cPH1 offers charging via a fixed cable of either Type 1 or Type 2 and/or also via
charging sockets according to IEC 62196-2 Type 2 (depends on your variant). For
those charging sockets
e C H A R G E
offers additional cables, e. g. a charging
cable with Type 2 plug on both ends or an adapter cable (Type 2 to Type 1) for
electric vehicles with Type 1 charging sockets.
Alternatively the cPH1 is also available with a Schuko plug socket. Your distributor
can provide further information.
We set maximum value on the user‘s safety on all of our products.
Therefore, the cPH1 Wallboxes offer effective protection against short circuit,
electric shock and other threats due to its built-in protective switches and fault-
current detection.
Via two LED lights on the housing the user is always informed about the current
state of the charging station.
Instruction Manual
cPH1
charging station
Version: 1.2.4
11
