installation, please contact first the company that has carried out the installation. If
the errors still cannot be removed, please contact the technical support of
e C H A R G E H a r d y B a r t h G m b H
.
Via Mail
Via telephone
+49 (0) 9666 – 188 1350
Please make sure to store this manual in a safe and always accessible place.
A service case occurs, when...
•
the housing has been damaged mechanically.
•
the housing cover has been removed or cannot be closed or locked anymore.
•
the necessary protection against water and/or foreign objects seems not to be
provided anymore.
•
the charging sockets and/or the external charging cable are visibly damaged
or damaged in functional regards.
•
the charging station does not work properly or is damaged otherwise.
Please also note the following:
•
Do not install the charging station in close vicinity of running water or jetting
water: The cPH1 is sufficiently protected against spray and splash according
to IP44.
•
The cPH1 must not be installed in an environment prone to or with
danger of explosion (EX area).
•
Do not install the charging station in any environment prone to or with
danger of flooding.
•
Please note that an additional fuse could be required due to a
connected vehicle and/or due to national regulations.
•
Please note that in some countries (other than Germany) and/or due to
various vehicle manufacturers, tripping characteristics of the fault-current
circuit breaker (type B) can be required. Please contact your distributor to
learn about the requirements.
Instruction Manual
cPH1
charging station
Version: 1.2.4
6