RFID-Module (optional)
The centrally located LED Display (RED) shows the current status of the RFID
module of the charging station.
During normal operation the LED lights are flashing steadily every six seconds.
This is to show that the RFID module is ready.
After connecting your vehicle/charging cable to the charging station, hold an active
RFID identification card over the module.
Upon recognizing the RFID card provided that it is registered in the data base the
LED light will glow for about 1.5 seconds and the charging process will start.
If the LED light flashes three times, these could be the reasons:
•
The RFID card is not activated,
•
or there is a charging cable connected to the second charging socket which has
not been reserved or activated.
In these cases the charging process will not start.
If two charging sockets shall be activated at the same time, unplug one of the
charging cables and re-register the cables one after another.
If your RFID card wasn’t accepted, please wait for a moment before trying again. If
the charging station still doesn’t activate after that, your RFID card is either
damaged or not registered in the database.
Instruction Manual
cPH1
charging station
Version: 1.2.4
25
