Hanwha HCR-5, Руководство пользователя, Страница: 133 / 206

Chapter 9 Programming
133
command is stopped, the Loop command is stopped, and the next program command is
executed.
9.10
SWITCH Command
Use the command to execute a different command depending on each specific case. An
IF command is executed after assessing all the conditions branching to Else IF, but a
SWITCH command is executed immediately by finding the corresponding case, thus it
is much faster than execution of an IF command.
1.
Using the drop-down menu next to
Switch
, select a variable.
For more details about the variable setting, refer to
9.2 Setting Variables
.
2.
Enter a value corresponding to each case.

To add a Case, press the
+ Case
button.

To delete the Case you added, select the checkbox for the Case and then press the
Delete
button.

Click the
Break
button to select whether use the Break property for each Case
statement. (Default: Use Break)