handi quilter HQ Stitch 710, Руководство по обслуживанию

Страница: 44 / 132

Needle-to-Hook Clearance
(2 of 2)
1.
With the machine off, push the
needle bar to the left. Turn the hand
wheel to bring the tip of the hook
directly behind the needle. The distance
between the back of the needle and the
tip of the hook should be 0 - 0.
1
mm.
2.
If an adjustment is needed, locate the
three large Phillip's head screws on the
hook base plate. Loosen and re-snug
the third pivot point screw. This will
provide resistance against the
adjustment. Then loosen the other two
screws.
3.
Push the plate closer or away from
the needle to make the necessary
adjustment. Tighten the three screws
fully.
4.
Recheck the distance after adjusting
the plate in left, center, and right needle
positions. You can use a flathead
screwdriver to push the needle and see
if there is any deflection.
41
Pivot point