Halytech HYDROSPIDER2, Руководство пользователя

Страница: 92 / 140

Halytech hydroSpider2 User’s Manual v1.23
Page 88
Appendix D. SMS Commands
Each SMS message sent to the hydroSpider must begin with the hydroSpider’s serial number. The
hydroSpider will reject the SMS message if this serial number is incorrect, and will not respond to
the SMS message.
The hydroSpider’s serial number can be obtained by reading the label on the enclosure (see 2.1 -
Labels), the Log In page (see 4.2 - Logging in), or by looking on the
About page (see 4.9 - About).
After the serial number, you may send one or more commands. The format for SMS commands is as
follows:
<command> =' <value> '
Multiple commands may be sent in a single SMS by separating them from one another using a space.
For example : to send the getrep command to a unit with serial number 002716, the following SMS
message would be sent to the unit’s mobile number:
002716 getrep='reports@halytech.com.au'
For example : to send the getrep and getrepfmt commands to a unit with serial number 002716, the
following SMS message would be sent to the unit’s mobile number:
002716 getrep='reports@halytech.com.au' getrepfmt='d'
Note : Generally the order of commands does not matter, but the serial number must be the first
item in the message.
Note : You cannot spread a single set of commands over multiple SMS messages. If more than 160
characters are sent in one SMS message, the hydroSpider will reject the entire message. You may
send the hydroSpider multiple SMS messages at a time, but be aware that each must begin with the
hydroSpider’s serial number, and the order in which multiple SMS messages are received /
processed is not guaranteed.
Note : You should not include any ‘\’ (backslash) characters in your SMS messages, as they will be
received by the hydrospider2 as a ‘ /’ (space followed by forward slash).
Note : Only the settings which are sent in the SMS message are changed. All other settings remain
unchanged.
Note: in all examples the serial number is shown as 002716. You need to replace this with your
hydroSpider’s own serial number.