Halytech
hydroSpider2 User’s Manual v1.23
Page 121
Appendix I2.
Raw Report Format
Raw reports contain the following columns:
1.
Date in d/mm/yyyy format
2.
Time in 24-hour h:mm:ss format
3.
Primary identifier (see Appendix K)
4.
Secondary identifier (see Appendix K)
5.
Channel value or message
The raw report format is illustrated below with a sample snippet:
Sample raw report
Appendix I3.
Diagnostic Report Format
The layout of data in a diagnostic report is identical to that of a raw report. Additional information is
given for channels with “Log difference in reading” enabled. For these channels, diagnostic reports
have an additional column which shows the running total value of that channel.
Diagnostic reports contain the following columns:
1.
Date in d/mm/yyyy format
2.
Time in 24-hour h:MM:ss format
3.
Primary identifier (see Appendix K)
4.
Secondary identifier (see Appendix K)
5.
Channel value or message
6.
Running total channel value (channels with “Log difference in reading” enabled only)
The diagnostic report format is illustrated below with a sample snippet. Take note of the 6
th
column
for channel with channel ID 1, which shows this channel’s running total:
