Halytech
hydroSpider2 User’s Manual v1.23
Page 123
Appendix I4.
Filtered Report Format
Filtered reports contain the following columns:
1.
Channel name
2.
Date and time in
dd-mmm-yy hh:mm:ss
format
3.
Channel value
Sample filtered report
There are a number of special cases for the channel name:
When a Switch channel changes from ON to OFF, the number of seconds it was ON is also
logged. This is recorded in the filtered report as
<channel name>
_run.
Midnight log values are displayed in filtered reports as
<channel name>
_reading. For
channels with “log difference” enabled, this will be the total channel count.
If Min/Max logging is enabled on a channel, the maximum sampled value will be logged and
displayed in filtered reports as
<channel name>
_max.
If Min/Max logging is enabled for a channel, the minimum sampled value will be logged and
displayed in filtered reports as
<channel name>
_min.
For example, look at the last row in the sample filtered report shown above. This row reads ‘Float
Switch_run’, which indicates that the switch was ON for 22 seconds before turning back off.
Note that filtered reports don’t contain any information, warning, or error messages.
