18 June 2016
X6-ElectroMod
A 160AH 1.5KW Electrical Power Generator for the BMW X6
pg. 8
Copyright © 2016, HallonPower. All content and images presented on this website are copyrighted © and all rights are reserved.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor
implied that any item sold here, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page. This document
may be modified at any time and without notice.
Important Cable Considerations before Installation
M300 Charger cable modifications
Both the AC cable of the charger and the DC out cables have to be modified to connect to the rest of
the system.
1.
The
M300 AC cable
must have a
plug change. Allow enough cable
to be able to reach the SCP.
Remove the mains plug from the
cable and replace it with a C14
plug as shown. This will be able to
connect to the bottom of the SCP
and receive AC current from
there.
2.
The
M300 DC Out cable
needs to
also have its plug changed (not
shown here). Allow enough
cable to be able to reach the
SCP. Remove the DC plug from
the cable and replace it with 2x
Anderson Powerpoles. Make
sure the positive red cable is
fitted with a red Powerpole and
the negative black cable is fitted
with a black Powerpole. These will be able to connect to the colour matching Powerpoles on a
long cable coming out of LOOM 2 (shown above).
When connecting the M300 Powerpoles to the LOOM2 matching Powerpoles,
zip-tie them together so that they do not get disconnected during installation.
If you find that the M300 is not charging your batteries, it is probably because these
connectors were disconnected. To avoid the inconvenience of removing cables and
batteries to get to this joint,
make sure you tie them up pretty well
!
WARNING!
Connect the M300 only to LOOM2 colour matching Powerpoles (red&black)!
Do not connect to loom1 Powerpoles (white&black) which are designed to output DC
current. Connecting here may damage your charger.
