18 June 2016
X6-ElectroMod
A 160AH 1.5KW Electrical Power Generator for the BMW X6
pg. 7
Copyright © 2016, HallonPower. All content and images presented on this website are copyrighted © and all rights are reserved.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor
implied that any item sold here, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page. This document
may be modified at any time and without notice.
Two side brackets are actually screwed onto the sides of the trunk. These are actually what really
hold the System Panel in position. So once you lower the panel into the luggage compartment, slide
the 3 bottom brackets all the way into the floor slots.
Wait until the Power Distribution Vertical Panel has been placed into position and then using two
screws, fasten these side brackets onto the sides of the trunk.
Power Distribution Vertical Panel
This panel separates the Power Distribution area from the Service Battery Bank compartment. It is
used to fasten the PD area components and helps
to keep the batteries in place.
It will require a screw to hold it in position against
the rear wall of the trunk floor compartment.
Please follow the detailed installation instructions
in the ‘Installation procedure’ section.
There are a total of 3 screws that will ever be drilled into any part of the car in this
solution. We tried to keep any invasive means to an absolute minimum. This is why
we have employed the L-shaped brackets to provide us with the necessary stability
without using any screws, which also makes removing the panel a breeze.
