18 June 2016
X6-ElectroMod
A 160AH 1.5KW Electrical Power Generator for the BMW X6
pg. 17
Copyright © 2016, HallonPower. All content and images presented on this website are copyrighted © and all rights are reserved.
All manufacturer names, symbols, and descriptions, used in our images and text are used solely for identification purposes only. It is neither inferred nor
implied that any item sold here, is a product authorized by or in any way connected with any vehicle manufacturers displayed on this page. This document
may be modified at any time and without notice.
Connect the cables to the power input terminals on the rear panel of the inverter. The red terminal is
positive (+) and black terminal is negative (-). Insert the cables into the terminals and tighten screw
to clamp the wires securely.
WARNING!
Make sure all the DC connections are tight (torque to 9 – 10 ft-lbs, 11.7 – 13 Nm). Loose
connections could result overheat in a potential hazard.
Battery to inverter cable connection
Do not place anything between battery cable lug and terminal surface. Assemble exactly as shown.
AC Safety Grounding:
The AC output ground wire should go to the grounding point for your loads
(for example, a distribution panel ground bus).
This is taken care of internally in the SCP.
What we have included here are some of the most important points regarding the
installation and operation of this inverter, making it relevant to this manual.
Please consult the Inverter user manual for more details and information.
