Haier HU062WAMNA, Руководство по обслуживанию

Страница: 76 / 158

76
WARNING
• Place the unit on a stable, level surface that
withstands the weight of the unit to prevent the unit
from tipping over or falling causing injury as a result.
• Be sure to carefully follow each step in this handbook
when installing the unit.
Improper installation may result in water leak, electric
shock, smoke or fire.
• Only use specified cables for wiring. Securely connect
each cable, and make sure that the cables are not
straining the terminals.
Cables not connected securely and properly may
generate heat and cause fire and explosion.
• Have all electrical work performed by a licensed
electrician according to the local regulations and the
instructions given in this manual. Secure a circuit
designated exclusively to the unit.
Improper installation or a lack of circuit capacity may
cause the unit to malfunction or present a risk of electric
shock, smoke,and fire.
• Take necessary safety measures against typhoons
and earthquakes to prevent the unit from falling over.
• Do not make any changes or modifications to the unit.
In case of problems, consult the dealer.
If repairs are not made properly, the unit may leak water
and present a risk of electric shock, or it may produce
smoke or cause fire and explosion.
• Securely attach the terminal cover(panel) on the unit.
If installed improperly, dust and/or water may enter the
unit and present a risk of electric shock, smoke, fire, or
explosion.
• Do not touch the fins on the heat exchanger with bare
hands, for they are sharp and dangerous.
• Only use refrigerant R32 as indicated on the unit when
installing or relocating the unit.
The use of any other refrigerant or an introduction of
air into the unit circuit may cause the unit to run an
abnormal cycle and abnormal cycle and cause the unit
to burst.
• In the event of a refrigerant gas leak, provide
adequate ventilation to the room.
If leaked refrigerant gas is exposed to a heat source,
noxious gases, fire or explosion will be caused.
• When installing the unit in a small room, safeguard
against hypoxia that results from leaked refrigerant
reaching the threshold level.
Consult the dealer for necessary measures to take.
• Do not try to defeat the safety features of the devices,
and do not change the settings.
Defeating the safety features on the unit such as the
pressure switch and temperature switch or using parts
other than the dealer or specialist may result in fire or
explosion.
• When relocating the air conditioner, consult the dealer
or a specialist.
Improper installation may result in water leak, electric
shock, or fire.
• Only use specified parts.
Have the unit professionally installed. Improper
installation may cause water leak, electric shock,smoke,
fire, explosion.
• After completing the service work, check for a
refrigerant gas leak.
If leaked gas refrigerant is exposed to a heat source
such as fan heater,stove,and electric grill, noxious gases
may form.