Haier HU062WAMNA Скачать руководство пользователя страница 75

Страница: 75 / 158

Carefully read the following information in order to operate the air conditioner correctly.

Below are listed three kinds of Safety Precautions and Suggestions.

WARNING

Incorrect operations may result in severe consequences of death or serious injuries.

CAUTION

Incorrect operations may result in injuries or machine damages; in some cases may cause serious

consequences.

INSTRUCTIONS: These information can ensure the correct operation of the machine.

The following safety symbols are used throughout this manual:

: Indicates an action that must be avoided.

: Indicates that important instructions must be followed.

: Indicates a part which must be grounded.

: Beware of electric shock (This symbol is displayed on the main unit label.)

After completing installation, test the unit to check for installation errors. Give the user adequate instructions

concerning the use and cleaning of the unit according to the Operation Manual.
Be sure to conform with the following important Safety Precautions.

WARNING

• If any abnormal phenomena is found

(e. g.smell of firing), please open the

window and well ventilated the room

immediately, then cut off the power

supply immediately, and contact the dealer to find out the

handling method.

In such case, to continue using the conditioner will damage

the conditioner, and may cause electrical shock, fire, or

explosion hazard.

• Don't dismantle the outlet of the

outdoor unit.

The exposure of fan is very

dangerous which may harm human

beings.
• When need maintenance and repairment,

call dealer to handle it.

Incorrect maintenance and repairment

may cause water leak, electrical shock,

fire, and explosion hazard.

• After a long time use of air-conditioner,

the base should be checked for any

damages.

If the damaged base is not repaired, the

unit may fall down and cause accidents.

• Air-conditioner can't be installed in the environment

with inflammable gases because the inflammable

gases near air-conditioner may cause fire and

explosion hazard.

Please let the dealer be responsible for installing the

conditioner. Incorrect installation may cause water

leak, electrical shock, fire, and explosion hazard.

• No goods or nobody is permitted to placed on

or stand on outdoor unit.The falling of goods and

people may cause accidents.

• Call the dealer to take measures to prevent the

refrigerant from leaking.

If conditioner is installed in a small room, be sure to

take every measure in order to prevent suffocation

and explosion accident even in case of refrigerant

leakage.

• Don't operate the air-conditioner with

damp hands.Otherwise it will be shocked.

• When conditioner is installed or reinstalled, the

dealer should be responsible for them.

Incorrect installation may cause water leaking,

electrical shock, fire, and explosion hazard.

• Only use correctly-typed fuse.

May not use wire or any other materials

replacing fuse, otherwise it may cause

faults or fire accidents.

• Connect earthing wire.

Earthing wire should not be connected to the

gas pipe, water pipe, lightning rod or phone

line, incorrect earthing may cause shock.

•

Use drain pipe correctly to ensure efficient drainage.

Incorrect pipe use may cause water leaking.

• Installed explosion-proof electrical-leaking circuit

breaker.

It easily cause electrical shock without circuit breaker.

• Have the unit professionally installed.

Improper installation by an unqualified person may result in

water leak, electric shock, fire, or explosion.

• Be sure to carefully follow each step in this

handbook when installing the unit.

Improper installation may result in water leak, electric

shock, smoke or fire.

Содержание HU062WAMNA































































































































































Результаты поиска

Содержание HU062WAMNA

Отзывы:

Похожие инструкции для HU062WAMNA

Бренды по названию

Популярные бренды

Haier HU062WAMNA, Руководство по обслуживанию

Результаты поиска

Содержание HU062WAMNA

Отзывы:

Похожие инструкции для HU062WAMNA

Бренды по названию

Популярные бренды